Vickers Vanguard

The double-bubble fuselage is clearly visible, as are the larger than normal windows kept from the Viscount
| Table of contents |
|
|
Originally designed to a BEA requirement for a 100-seat aircraft to replace their Viscounts. The original Type 870 design was then modified when TCA expressed their interest in the design as well, and Vickers returned the updated Type 950 that filled both requirements.
The main difference between the Viscount and Vanguard was the construction of the fuselage. The Vanguard started with the original Viscount fuselage, but cut it off about 1/2 of the way up from the bottom, and replaced the top section with a larger-diameter fuselage to give it a double bubble cross-section (similar to the Boeing Stratocruiser). The result of the larger upper portion was a considerably roomier interior, with increased cargo capacity below the floor.
Vickers Vanguard (G-APEC) at London (Heathrow) Airport in 1965. This aircraft was built in 1959 and was lost (broke up in flight) in 1971
With this larger, and heavier, fuselage came the need for a new engine to lift it. Rolls-Royce was ready for this, and delivered their new Tyne design with a nominal 4,000 hp (3,000 kW) (as compared to the Viscount's Dart of about 1,700 hp (1,300 kW)).
The first Type 950 prototype flew on January 20th, 1959, entering service in 1961.
For Type 952:
History

![]()
Models
Specifications
| List of aircraft - List of aircraft manufacturers>Aircraft manufacturers - Aircraft engines - Aircraft engine manufacturers - Years in Aviation |
The name "Vanguard" had earlier been used on a civilian model of the Vickers Virginia bomber, other versions of the same aircraft being the Victoria and Valentia.