RFID
Radio frequency identification (RFID) is a method of remotely storing and retrieving data using devices called RFID tags. An RFID tag is a small object, such as an adhesive sticker, that can be attached to or incorporated into a product. RFID tags contain antennas to enable them to receive and respond to radio-frequency queries from an RFID transceiver.
| Table of contents |
|
2 Current Usage 3 Potential Uses 4 Controversy 5 External links |
RFID tags can be either active or passive.
Passive RFID tags do not have their own power supply: the minute electrical current induced in the antenna by the incoming radio-frequency scan provides enough power for the tag to send a response. Due to power and cost concerns, the response of a passive RFID tag is necessarily brief, typically just an ID number (GUID). Lack of its own power supply makes the device quite small, commercially available products exist that can be embedded under the skin.
Active RFID tags, on the other hand, must have a power source, and may have longer ranges and larger memories than passive tags, as well as the ability to store additional information sent by the transceiver.
As passive tags are much cheaper to manufacture, the vast majority of RFID tags in existence are of the passive variety.
There are four different kinds of tags commonly in use, their differences based on the level of their radio frequency: Low frequency tags (between 125 to 134 kilohertz), High frequency tags (13.56 megahertz), UHF tags (868 to 928 megahertz), and Microwave tags (2.45 gigahertz).
Low frequency RFID tags are commonly used for animal identification, beer keg tracking, and automobile key-and-lock, anti-theft systems.
High frequency RFID tags are used in library book or bookstore tracking, pallet tracking, building access control, airline baggage tracking, and apparel item tracking. High frequency tags are widely used in identification badges, replacing earlier magnetic stripe cards. These badges need only be held within a certain distance of the reader to authenticate the holder.
UHF RFID tags are commonly used commercially in pallet and container tracking, and truck and trailer tracking in shipping yards.
Microwave RFID tags are used in long range access control for vehicles, an example being General Motors' Onstar System.
Some toll booths, such as California's FasTrak[1] system, are equipped to read data from RFID tags as vehicles pass. The RFID tag is connected to a prepaid account that is debited to pay for the toll. The fact that appropriately equipped vehicles no longer need to stop to pay the toll helps to reduce traffic congestion.
Some kinds of sensors, such as seismic sensors, may be read using RFID transceivers, greatly simplifying remote data collection.
In January 2003, Michelin announced that it has begun testing RFID transponders embedded into tires. After a testing period that is expected to last 18 months, the manufacturer will offer RFID-enabled tires to car-makers. Their primary purpose is tire-tracking in compliance with the United States Transportation, Recall, Enhancement, Accountability and Documentation Act (TREAD Act).
RFID tags are often envisioned as a replacement for UPC bar-codes, having a number of important advantages over the older bar-code technology. RFID codes are long enough that every RFID tag may have a unique code, while UPC codes are limited to a single code for all instances of a particular product. The uniqueness of RFID tags means that a product may be individually tracked as it moves from location to location, finally ending up in the consumer's hands. This may help companies to combat theft and other forms of product loss.
Many somewhat far-fetched uses, such as allowing a refrigerator to track the expiration dates of the food it contains, have also been proposed, but few have moved beyond the prototype stage.
The use of RFID technology has engendered some controversy. Most concerns revolve around the fact that RFID tags affixed to products remain functional even after the products have been purchased and taken home. Although RFID tags are only officially intended for short-distance use, they can be interrogated from great distances by anyone with a high-gain antenna, potentially allowing the contents of a house to be scanned at a distance.
The three main privacy concerns regarding RFID are:
Types of RFID Tags
Current Usage
Potential Uses
Controversy
At a 2003 California Senate hearing Senator Debra Bowen summarised the concerns thus:
"How would you like it if, for instance, one day you realized your underwear was reporting on your whereabouts?"[1]External links